Devices

• PCS-CONTROL BOX
  With it colors and parameters can be adjusted like it is known from the PC software. But now the sensors can be run independently from the software and without a PC accordingly. For automation processes a computer is no longer needed. The PCS-CONTROL BOX is communicating with the color sensor via a RS232 interface.
• PCS-BREAK-OUT BOX
  By use of a special firmware (Ver. "TTT") this box serves for teaching a single color into a PCS-II color sensor. For displaying all outputs of the PCS-II are connected to LEDs. With an additional button the sensor can automatically be adjusted to the optimal signal range. 3 LEDs serve for signal level displaying.
• RS232 BOX, 1m connector cable
  Connector box for mounting up to 5 color sensors to RS232 PC interface.
• USB to RS232 converter, 0.2m connector cable, USB/SUB-D 9pol.
  After mounting to USB PC interface this converter provides an RS232 interface on the PC.
• Power supply adapter 100-240VAC/24VDC, 250mA, 5.5/2.1mm plug, 1m connector cable
  Power supply adapter for providing energy to RS232 connector box or PCS test board.

Datasheets